for aquariums up to 2.000 liter

hard facts  Bubble King® DeLuxe 250 internal:
with 10V connection
adjustable Red Dragon® 3  Mini Speedy skimmer pump 50 Watt 1.500 l/h
motor speed adjustable: 300-3.000 1/min
Base plate: Ø 28,5 cm / height ~ 67 cm

Technical data Bubble King® DeLuxe 250 internal:
Water level: ~ 180 mm up to ~ 270 mm
Weight skimmer: 13 kg inclusiv pump
Dimension skimmer: 340 mm wide / 455 mm length / ~ 670 mm height

  Data_sheet.pdf   Spare_parts_and_accessories.pdf

  Operating_and_maintenance_manual.pdf
 

Also with conventional Bubble King® Red Dragon® 1 not-adjustable pump available.

Red Dragon® 3 Mini Speedy pump 50 Watt / 1.500 l/h 

Technical data  Red Dragon® 3 Mini Speedy pump 50 Watt / 1.500 l/h air intake:
Skimmer-pump:
Motor speed adjustable Bubble King Red Dragon® 3 Mini Speedy pump 50 Watt  1.500 l/h
Delivery rate adjustable: max. ~ 1.500 l/h   Air inlet and max. ~ 4.000 l/h) Water inlet
Wattage - active power: P = min. 15Watt  -  max. 60 Watt
speed adjustable Brushless DC pump
Intake side: Nozzle with ozone & air plug 
Pressure side: reducing ring Ø 32/25 mm

Operating voltage: 230 Volt 50 Hz  (also in 110V/60Hz available)
Protection class pump: IP 68  control unit: IP 66  
Weight pump: 3,5 kg
Height of intake side: center 60 mm
Dimension pump: 100 mm wide / 210 mm length / ~ 140 mm height
Dimension control unit: 120 mm wide / 160 mm length / ~ 65 mm height

  Data_sheet_and_spare_parts.pdf     Operating_and_maintenance_manual.pdf

• Saltwater resistant M6 grade 2 titanium screws
• Saltwater resistant parabolic rubber feet for acoustic decoupling
• Extreme low noise brushless DC skimmer-pump with grouted power electronics
• High efficient technology "Made in Germany"
• compact dimensions
• High performance ceramics bearings and hollow shaft for bypass purging in the rotor housing
• Only saltwater resistant pump with titanium rotor, titanium stator and shrivelled bearings
• Easy usage and maintenance. Low risk of calcification due to polished titanium parts and compulsory purgeing
• Heavy and massive craftsmanship against vibrations and oscillation
• CE conformity, developed and built according to VDE guidelines

/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The connection of a controller/computer is prepared in each pump!
Prepared for connection to an aquarium computer (E.g. GHL) via a 0-10V interface.
The additional controller, for the connection to the computer, costs 159€ (incl. all connection cables and main adaptor)

Tested so far folowing these computers:
GHL ProfiLux 3.1 and from Neptune Systems the Apex Aqua Controller.

Compatible with following brands:

https://www.aquariumcomputer.com/
http://www.neptunesystems.com/
https://www.reefai.com/

//////////////////////////////////////////////////////////////////////////////
Functioning of the electronics:
Once a voltage > 0,5V to the 10V interface is, the interface adapter takes over controlling and the system and lock(disable) the buttons on the controller. Voltage will be < 0,5V normal controller operation and the buttons are again released. So can the interface adapter stay connected without performing a function.

If the Aquarium(tank)-computer voltage under 0,5V the 0-10V interface is shut down and the pump can be operated manually. From 0,5V, the interface will take over control of the scheme. In the area of 0,5V-0,8V the pump is switched off. 1V starts the pump at the lowest level (15W) and run. At an increase of 0,5V will increase the level, also. So 1V = 15W  2,5V = 25W….. 5,0V = 50W.

At a higher input voltage remains the Speedycontroller to the maximum setting are available and no longer increases. The interface adapter behaves as if the corresponding would push the button.