Black Box Controller by Aquatronica is a leading-edge controller devised for users who want to stay connected to their aquarium and program its operation, even remotely. 

The pH interface connects the pH probe to the system area of the Aquatronica Power Bar to continuously measure and monitor the pH in aquariums.

The Aquatronica temperature sensor can connect directly to the Power Bar or via the temperature and level sensor interface (ACQ-210N-TL), to continuously measure the water temperature of the aquarium.

The Aquatronica Active Hub allows other Aquatronica accessories to be connected to the control system when there are no more free connectors on the Power Bar.

The Aquatronica solenoid valve can be used with a reverse osmosis unit or a CO2 system.

Black Box Controller by Aquatronica is a leading-edge controller devised for users who want to stay connected to their aquarium and program its operation, even remotely. 

The Redox interface connects the Redox probe to the system area of the Aquatronica Power Bar to continuously measure and monitor the ORP (Oxide-Reduction Potential) in aquariums.

The pH electrode is for measuring the pH level on an aquarium in continuous immersion. It must be connected to power units through the appropriate interface.

The Aquatronica SMS module uses a mobile connection to send messages with information from an aquarium, on mobile phones.

The electrode cleaning solution allows a correct periodic maintenance of the probes.

The high conductivity interface connects the high conductivity probe to the system area of the Aquatronica Power Bar to continuously measure and monitor the salinity in saltwater aquariums.

The Redox probe is for measuring the oxidation reduction potential (ORP) value in the aquarium in continuous immersion. It must be connected to the power unit through the dedicated Redox interface.

Aquatronica dosing pumps guarantee the possibility of metering liquids in your aquarium.

The 53 mS/cm calibration solution allows a correct calibration of the high conductivity electrode.

The low conductivity interface connects the low conductivity probe to the system area of the Aquatronica Power Bar to continuously measure and monitor the water in freshwater aquariums.

The level sensor is used to check the level of water in the aquarium or in an external filter, providing, for example, the possibility to top-up the water automatically thanks to the controller’s special program.

The Tunze® Pumps Module enables Tunze® electronic motion pumps to be controlled by the Aquarium Controller System.

The1.4 mS/cm calibration solution allows a correct calibration of low conductivity probe.

The temperature and level interface is used to connect additional temperature and level sensors to the system area of the Aquatronica Power Bar.

The high conductivity electrode is used to measure the Conductivity value in continuous immersion in salt water aquariums.

The ECOTECH Pumps Module enables ECOTECH electronic motion pumps to be controlled by the Aquarium Controller System.

The Dissolved Oxygen Interface connects the Dissolved Oxygen Interface electrode to the system area of the Aquatronica Power Bar to continuously measure and monitor the level of dissolved oxygen (O2) in both freshwater and marine aquariums.

The Aquatronica Low Conductivity Probe connects to the Power Bar via the Low Conductivity Interface to continuously measure the conductivity value of fresh water in the aquarium.

With this module, it is possible to connect to the controller, variable intensity pumps of 0-5V or 0 -/+ 10V type JEBAO and AQUAMEDIC.

The Water Leak Interface connects one or two water leak sensors to the area of the Aquatronica Power Bar.

The Dissolved Oxygen Probe is for measuring the value of dissolved oxygen in an aquarium in continuous immersion. It must be connected to power units through the appropriate interface.

The flow interface connects the flow meter sensor to the system area of the Aquatronica Power Bar to continuously measure and monitor the flow of your pump, filter, etc...