ReBiotic is a 100% natural bacteria-based product that contains a unique mixture of bacteria strains. The addition of these special strains help replenish bacterial stability and repair existing bacteria films that have been damaged by sudden system changes or "Old Tank Syndrome".

ReBiotic bacteria also improves overall water quality and health of live rock without the risk of alternating water chemistry, disrupting deposits, or growing unsightly algae.

Application:

Pour ReBiotic into a sample cup and add 1 liter of aquarium water to this cup. Stir the water several times to activate the bacteria and let sit for 1 hour.

At hour 1, pour the bacteria solution directly into a high-flow area of the aquarium.

Turn OFF skimmer for 6 hours.

Turn OFF UV and OZONE for at least 24 hours.

Dosage:
1 heaping teaspoon (approx. 5g) per 400 Liters of aquarium volume

Initial dosage:
Dose 2x per week: Add 1 heaping teaspoon (approx. 5g) per 400 Liters for 4-6 weeks.
After week 4-6: Add a maintenance dose every 4 weeks.

ReBiotic is 100% natural and safe for animals when used as intended. See Application.

Safety note:
Keep product away from children. Product only for aquarium use.

Fauna Marin THE DIP is a highly effective coral dip solution used for cleaning various types of corals. It also helps acclimate new specimens to the aquarium by strengthening the pest resistance of your coral. THE DIP will remove unwanted deposits and pests from all corals.

Dip every new coral purchase in THE DIP coral bath to avoid unwanted pests and strengthen the pest resistance of your corals.

• Highly active solution made from natural ingredients
• Contains no oils, Iodine, or aggressive oxidative ingredients
• Does not darken coral tissue
• Simple, safe, affordable, and highly effective

DOSAGE:

• Take 1 Liter (0.26 US gal) of aquarium water and add 15ml of THE DIP to the container and stir.
• Place coral in the dip and gently swirl it around in intervals.
• Dip the coral for a maximum of 5 minutes.
• Rinse the coral in a separate container with aquarium water and place it back into the aquarium.
• Discard the dip and rinse solution.

THE DIP is not suitable for use in the aquarium and not for bathing fish, shrimp, mussels, sea urchins, and similar animals - remove them from the coral before the placing in dip.

INGREDIENTS:
Water, surfactants, and organic salts

SAFETY PRECAUTIONS:
Wear gloves when using THE DIP! Keep product away from children. Do not inhale, do not swallow. Avoid skin and eye contact.

Power Phos is a wet Iron-hydroxide based adsorber which safely removes silicates and phosphates from the aquarium. The pollutants are bound to the surface of Power Phos and will not be released again.
PowerPhos can maintain very low nutrient concentrations in your tank. Unwanted Algae growth will be stopped and corals will show their natural colours.

Instructions and Dosing recommendation:
Please do all changes in the aquarium carefully and slowly.

Start with 100 ml per 300 L of water.
After 5 days the dose can be increased up to 150 ml per 300 L of water.
Never use more than 200 ml for 300 L of water.

To obtain best results and maximize adsorbtion efficiency, place the material between two layers of filter wool or use a fluidized-bed-reactor.
Check phosphate concentration regularly with reliable test kits, e.g. from Salifert, Macherey & Nagel, or Merck / Rowa.

Do NOT use PowerPhos in tanks that already have very low phosphate concentrations.
If phosphate concentrations start to increase again, exchange PowerPhos for fresh material.

PowerPhos is suitable for fresh and seawater. The material can warm up when getting wet for the first time.

The red colouration of the water is caused by the fine dust attached to the adsorber. It is not harmful and vanishes quickly.

Do NOT rinse the adsorber before use.

Keep away from children.
Not to be used for animals used for food production.
Do not inhale, do not swallow.
Avoid contact with skin and eyes.

Power Phos is a wet Iron-hydroxide based adsorber which safely removes silicates and phosphates from the aquarium. The pollutants are bound to the surface of Power Phos and will not be released again.
PowerPhos can maintain very low nutrient concentrations in your tank. Unwanted Algae growth will be stopped and corals will show their natural colours.

Instructions and Dosing recommendation:
Please do all changes in the aquarium carefully and slowly.

Start with 100 ml per 300 L of water.
After 5 days the dose can be increased up to 150 ml per 300 L of water.
Never use more than 200 ml for 300 L of water.

To obtain best results and maximize adsorbtion efficiency, place the material between two layers of filter wool or use a fluidized-bed-reactor.
Check phosphate concentration regularly with reliable test kits, e.g. from Salifert, Macherey & Nagel, or Merck / Rowa.

Do NOT use PowerPhos in tanks that already have very low phosphate concentrations.
If phosphate concentrations start to increase again, exchange PowerPhos for fresh material.

PowerPhos is suitable for fresh and seawater. The material can warm up when getting wet for the first time.

The red colouration of the water is caused by the fine dust attached to the adsorber. It is not harmful and vanishes quickly.

Do NOT rinse the adsorber before use.

Keep away from children.
Not to be used for animals used for food production.
Do not inhale, do not swallow.
Avoid contact with skin and eyes.

Power Phos is a wet Iron-hydroxide based adsorber which safely removes silicates and phosphates from the aquarium. The pollutants are bound to the surface of Power Phos and will not be released again.
PowerPhos can maintain very low nutrient concentrations in your tank. Unwanted Algae growth will be stopped and corals will show their natural colours.

Instructions and Dosing recommendation:
Please do all changes in the aquarium carefully and slowly.

Start with 100 ml per 300 L of water.
After 5 days the dose can be increased up to 150 ml per 300 L of water.
Never use more than 200 ml for 300 L of water.

To obtain best results and maximize adsorbtion efficiency, place the material between two layers of filter wool or use a fluidized-bed-reactor.
Check phosphate concentration regularly with reliable test kits, e.g. from Salifert, Macherey & Nagel, or Merck / Rowa.

Do NOT use PowerPhos in tanks that already have very low phosphate concentrations.
If phosphate concentrations start to increase again, exchange PowerPhos for fresh material.

Power Phos is suitable for fresh and seawater. The material can warm up when getting wet for the first time.

The red colouration of the water is caused by the fine dust attached to the adsorber. It is not harmful and vanishes quickly.

Do NOT rinse the adsorber before use.

Keep away from children.
Not to be used for animals used for food production.
Do not inhale, do not swallow.
Avoid contact with skin and eyes.