Power Phos is a wet Iron-hydroxide based adsorber which safely removes silicates and phosphates from the aquarium. The pollutants are bound to the surface of Power Phos and will not be released again.
PowerPhos can maintain very low nutrient concentrations in your tank. Unwanted Algae growth will be stopped and corals will show their natural colours.

Instructions and Dosing recommendation:
Please do all changes in the aquarium carefully and slowly.

Start with 100 ml per 300 L of water.
After 5 days the dose can be increased up to 150 ml per 300 L of water.
Never use more than 200 ml for 300 L of water.

To obtain best results and maximize adsorbtion efficiency, place the material between two layers of filter wool or use a fluidized-bed-reactor.
Check phosphate concentration regularly with reliable test kits, e.g. from Salifert, Macherey & Nagel, or Merck / Rowa.

Do NOT use PowerPhos in tanks that already have very low phosphate concentrations.
If phosphate concentrations start to increase again, exchange PowerPhos for fresh material.

Power Phos is suitable for fresh and seawater. The material can warm up when getting wet for the first time.

The red colouration of the water is caused by the fine dust attached to the adsorber. It is not harmful and vanishes quickly.

Do NOT rinse the adsorber before use.

Keep away from children.
Not to be used for animals used for food production.
Do not inhale, do not swallow.
Avoid contact with skin and eyes.

This probiotic filtration method combines effective nutrient reduction and ease of operation for use in tight spaces.

Fauna Marin Redupellet filters provide a simple and effective tool for nutrient control in aquariums and ponds. Thanks to the special design and high quality pellets NPO Pellets, this setup is efficient and cost effective.

Fauna Marin Redupellets consist of a 100% biodegradable biopolymer that has been specially developed for nutrient reduction. Additionally, it also finds application in the treatment of drinking water. Fauna Marin Redupellets promote the growth of aerobic and anaerobic bacteria to create a controlled nitrogen cycle in the filter system. The bacteria feed from the pellets and nutrients from the aquarium. Continued usage will help with Nitrogen and phosphate reduction thereby preventing the growth of algae and increasing bacterioplankton production for feeding corals.

• Super effective nitrate and phosphate reduction
• Crystal clear water, even at high stocking densities
• Nutrients are converted into bacterioplankton
• 100% Biodegradable
• Suffice 25-30ml pellets per 100 liters of water quantity as special pellets extremely high density
• Very low carbon emission, so controlled nutrient decomposition
• absolutely reefsafe
• Suitable for ponds and aquariums
• Extremely effective

Preparation of pellets

Water the required amount of pellets for 24 hours in tap water or douse them with boiling water and let it then for 2 hours in the water.

Unused pellets should be completely dried, otherwise they cannot be reused.

We recommend to use the REDU PELLETS with the special Fauna Marin Pellets Filter.
Avoid leaving the feed pump off for more than 8 hours. Doing so will result in the pellets decomposing. It is very important that the returning water drains on the side walls of the filter.
Correct circulation results in Oxygen enriched water, which has been depleted during the nutrient degradation.

Operating function

The starting dose is 20-30ml per 100 liters of aquarium volume and can be slowly increased as required up to 100ml / 100 liters.

After a few days, a slight cloudiness of the aquarium water can set that after a few days usually disappears on its own.

After about 10-21 days, the first nutrient reductions can already be measured. At the latest after about 8-12 weeks significant nutrient reductions to the animals should be visible.

Meanwhile suddenly increased or abnormally high readings can be ignored - the pellet filtering can affect water tests under certain circumstances and temporarily result in erroneous values.

Within no more than 3-4 months, the water values commute a low level. Fauna Marin Redu Pellets here make for a slow and steady reduction of phosphate and nitrate. The further decrease the

values in the system, the slower working of the filter.

Through the process of nutrient degradation also reduces the volume of the pellets. Because of their high density are NPO Redupellets, but only very slowly and you need significantly fewer pellets than most offered products. Fill degraded pellets after regularly. Proceed as when you restart it, and watering the pellets before use.

FAQ

Do I still need to do water changes?

You will still need to perform water changes. Filtering on pellets does not replace the conventional

water treatment, e.g. by regular water changes. Water changes will not only remove nutrients and

inhibitors, but also added trace elements and organic components, which are also important for the

growth of bacteria. Even with pellet filter we advise you to a weekly water change of 10%.

I found individual pellets in the filter tank? Is this bad?

By removing the pellets, some pellets are very small and can be flushed out of the filter in spite of

the protective screen. If this happens, siphon it out during the next water change.

Why do I measure increased nutrient values?

The abrasion of the bacteria and the possible presence of nitrite water tests can be irritated. This

usually happens in the first 2-3 months after initiation of pellet filtering. Look beside the measured

water values whatsoever on the condition of the animals - they grow well, there is no reason for

concern.

Why can I not measure any reduction in nutrients?

Either the filter process is not yet in full swing, or the current nutrient inputs is too high, or the tests

still show incorrect values (s. Above). In older aquaria, often large nutrient deposits have formed,

which can be reduced only after some time.

Check your tests with Fauna Marin Multi Reference and pay attention to the correct positioning of

the filter.

You can also have a phosphate-heat test. The application of ozone, UV, and certain medications can reduce the effectiveness of the bacteria on the pellets. In such a case we are happy to advise you individually.

How many pellets are consumed on a regular basis?

In an average 1000 gallon aquarium 500 ml pellets per year are consumed.
Depending on stocking rate, this amount can vary.

Some animals aren’t reacting well – what is the reason?

Through the proliferation of bacteria on the pellets different trace substances are consumed.
Creates a lack of these, anemones and leather corals can react with a loss of color. In this case, you can
replace the missing elements by dosing Ultra Organic.

Fauna Marin Zeo-Light a specially formulated Zeolite for reduction of nutrient concentrations in marine aquaria.

This Zeolite provides nitrate- and ammonium-reducing bacteria an ideal environment.

By using a composition of different Zeolites, carefully selected for their specific physical and chemical properties, this filter medium will reduce nutrient concentrations fast and effectively.

How to use:

For preparation wash the zeolite mix under tap water or use reverse-osmosis water and subsequently give the material a 24 h bath in tap water. After this preconditioning the zeolite mix is ready.

As a basic dosage apply 1000 g Zeolith mix to 1000 L (260 US gal lqd) aquarium net volume. Make sure you determine your net aquarium volume as exactly as possible.

Use the zeolite mix in a zeolite filter unit or in our automatic zeolite filter Zeomatic 2. The automatic cleaning process of Zeomatic 2 makes it easy to maintain a high level of filter function. Without automated purgation the zeolite mix requires cleaning in a 2 day interval. 75% of the zeolite gravel needs tobe replaced after 4 weeks (do not exchange the zeolite and UltraCarb L activated carbon on the same day, but use a14 day shift as a routine in changing both types of filter media).

Feel free to use any zeolite mix which is declared to be suitable for marine aquaria. However, we recommend to apply a zeolite from a producer with designated experience in the marine aquarium business, since several zeolite mixes for fresh water or pond filtration are unsuitable for marine aquaria and potentially have a harmful effect.

Fauna Marin Zeo-Light a specially formulated Zeolite for reduction of nutrient concentrations in marine aquaria.

This Zeolite provides nitrate- and ammonium-reducing bacteria an ideal environment.

By using a composition of different Zeolites, carefully selected for their specific physical and chemical properties, this filter medium will reduce nutrient concentrations fast and effectively.

How to use:

For preparation wash the zeolite mix under tap water or use reverse-osmosis water and subsequently give the material a 24 h bath in tap water. After this preconditioning the zeolite mix is ready.

As a basic dosage apply 1000 g Zeolith mix to 1000 L (260 US gal lqd) aquarium net volume. Make sure you determine your net aquarium volume as exactly as possible.

Use the zeolite mix in a zeolite filter unit or in our automatic zeolite filter Zeomatic 2. The automatic cleaning process of Zeomatic 2 makes it easy to maintain a high level of filter function. Without automated purgation the zeolite mix requires cleaning in a 2 day interval. 75% of the zeolite gravel needs tobe replaced after 4 weeks (do not exchange the zeolite and UltraCarb L activated carbon on the same day, but use a14 day shift as a routine in changing both types of filter media).

Feel free to use any zeolite mix which is declared to be suitable for marine aquaria. However, we recommend to apply a zeolite from a producer with designated experience in the marine aquarium business, since several zeolite mixes for fresh water or pond filtration are unsuitable for marine aquaria and potentially have a harmful effect.

Fauna Marin Zeo-Light a specially formulated Zeolite for reduction of nutrient concentrations in marine aquaria.

This Zeolite provides nitrate- and ammonium-reducing bacteria an ideal environment.

By using a composition of different Zeolites, carefully selected for their specific physical and chemical properties, this filter medium will reduce nutrient concentrations fast and effectively.

How to use:

For preparation wash the zeolite mix under tap water or use reverse-osmosis water and subsequently give the material a 24 h bath in tap water. After this preconditioning the zeolite mix is ready.

As a basic dosage apply 1000 g Zeolith mix to 1000 L (260 US gal lqd) aquarium net volume. Make sure you determine your net aquarium volume as exactly as possible.

Use the zeolite mix in a zeolite filter unit or in our automatic zeolite filter Zeomatic 2. The automatic cleaning process of Zeomatic 2 makes it easy to maintain a high level of filter function. Without automated purgation the zeolite mix requires cleaning in a 2 day interval. 75% of the zeolite gravel needs tobe replaced after 4 weeks (do not exchange the zeolite and UltraCarb L activated carbon on the same day, but use a14 day shift as a routine in changing both types of filter media).

Feel free to use any zeolite mix which is declared to be suitable for marine aquaria. However, we recommend to apply a zeolite from a producer with designated experience in the marine aquarium business, since several zeolite mixes for fresh water or pond filtration are unsuitable for marine aquaria and potentially have a harmful effect.