The D-D Function series pumps are multi-function DC pumps with a unique digital control that offer three different wave modes and a constant flow function. Also suitable for operating media reactors or as a pump for a closed circuit (models 5000/6500/10000 only).
The sine wave technology and low voltage motor are suitable for use in salt or fresh water and offer extremely low operating noise, low heat emission and high energy efficiency.
Specifications:
Maximum flow rate: 2000 L/H
Maximum delivery height: 2.2 M
Maximum power: 20 W
Power Output: 24V
Dimensions: 89mm (L) x 66mm (W) x 105mm (H) (without connection fittings)
Adapter included: 16mm x1 / 20mm x1
Characteristics
Complete range of high flow pumps with a compact footprint
Unique digital controller with 3 wave functions and constant flow mode
Sine wave technology for low running noise
Low voltage
Energy efficient engine
Suitable for salt and fresh water
Wear-resistant ceramic shaft and bearings
Removable footplate with vibration-damping rubber feet
Splash-proof connection between pump and controller
Flexible installation options
The 5000, 6500 and 10000 models can be installed externally
All models are fully submersible
The pump outlet can be oriented upwards, left or right
“Elephant nose” suction attachment included for anti-vortex operation
Standard suction basket for normal underwater use included
Quick coupling fittings for easy pump removal
Several different pipe connections included
Controller properties
Unique digital multi-function controller with touch button pad
Backlit color LCD display with adjustable screen brightness
Multilingual display with screen saver
4 different flow modes
Adjustable minimum and maximum power settings in Wave and Pulse modes.
Adjustable maximum power in continuous mode
Feeding mode and on/off functions
Dry running detection with automatic switch-off function
Removable holder
The functions
Continuous mode
The pump can be set for continuous operation to use as a standard return, reactor or equipment supply pump. The flow setting can be adjusted on the controller between the minimum and maximum power settings of 30 and 100.
Wave mode
A constant shaft power is generated as the pump ramps up and down between a minimum and maximum power setting. The frequency and power settings can be changed on the controller
Pulse mode
The pump speed alternates between a low and high power setting and can be used to create a standing wave. The frequency and power settings can be changed on the controller.
Storm mode
The pump's power alternates between different power levels at different frequencies to create a random flow pattern. Ideal for stirring up detritus so that it can be removed through filtration
