Optimized water filling
The AQUA-Lifter is a quiet, highly efficient, replaceable diaphragm pump that adds water gradually to achieve the desired level with precision, reducing stress on the aquarium ecosystem. It has a built-in anti-siphon valve to prevent forward siphoning. Compared to submersible pumps, diaphragm pumps have the advantage of operating safely without being submerged, so there are no cables in the water.
Efficient, reliable and well designed
The AQUA Lifter pump stand can be installed on aquariums with or without a rim, depending on the tank configuration. It can also be easily attached with a screw or nail to your aquarium cabinet or stand to reduce pump vibration.
Easy installation
The silicone seal helps reduce noise and vibration when operating the AQUA Lifter pump. Also, to avoid installation errors, the water inlet and outlet symbols are clearly marked.
Small, but very powerful!
Level detection is enhanced by the use of patented dual optical detection technology, which greatly reduces the risk of false detection due to water drops. This reduces specific failures such as overfilling and dry running of the pump.
The Smart ATO Lifter uses QST for real-time protection against any failure situation. QST can detect sensor, controller and empty tank malfunction. The Smart ATO Lifter issues an audible and visual alert at any time when it detects a fill time that is 6 times longer than the 1st fill time. For example, if the 1st fill time was 10 sec. then the controller will issue an alert when a fill time is greater than 60 seconds.
Specification
Power :
Power Input : 100-240 VAC 50-60 Hz
Power : 4.5 W @ DC 12 V
Power Cord Length : 6 ft (180 cm)
AQUA Lifter Pump (Built-in Anti-Siphon Valve) :
Suction Head : 6.5 ft (200 cm)
Flow Rate : 3.2 gph (12 lph)
Built-In Anti-Siphon Pressure : 1 feet (30 cm) max. height from water level of reservoir to tube outlet
Max. Mounting Thickness :
Sensor : 1/2 inch (12.7 mm)
AQUA Lifter Pump Holder : 1/2 inch (12.7 mm)
Length of Cable between Sensor and Controller : 6 ft (180 cm)
Tubing :
Length : 6.5 feet (200 cm)
ID : 5/32 inch (4 mm) / OD : 1/4 inch (6.4 mm)